| Welcome
to login |
|
|
| Navigation |
|
|
| Contact
us |
|
|
| Friendly
Link |
 |
|
|
Item NO.: IMM900
Description: MACHINERY PRODUCT
Details:
Specification:
Feature
1. Clamp unit
??The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
??Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
??End point positioning controlled by high precision transducers.
??Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
??Tie bars with unload slot marches spring nut can be constant of using for long time.
??closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
??five points holding pressure to clamping processes computer-optimized.
2. Injection unit
??n opposed cylinders ensure parallel injection movement.
??ew cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
3. Hydraulic system
??ustable backpressure and zero backpressure may be option.
??egrations valve board is response soon and high precision.
??raulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
4. Electrical control unit
a) There is 3-manners of manual, semi-auto, automatic in the menu.
b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
c) The menu of special computer imported has two color: one is black and write, other color.
SPECIFICATION
A
B
C
D
INJECTION UNIT
SCREW DIAMETER
mm
32
35
38
SCREW L/D RATIO
L/D
24.8
22
20.2
SHOT VOLUME(THEORETICAL)
cm3
112
134
158
INJECTION WEIGHT(PS)
g
102
122
144
INJECTION RATE
g/s
74
89
105
PLASTICIZING CAPACITY
g/s
10.8
11.5
13
INJECTION PRESSURE
MPa
203
170
143
SCREW SPEED
rpm
200
CLAMPING UNIT
CLAMP FORCE
kN
900
OPEN STROKE
mm
350
SPACE BETWEEN TIE BARS(W*H)
mm
360*360
MAX.MOULD HEIGHT
mm
380
MIN.MOULD HEIGHT
mm
150
EJECTOR STROKE
mm
100
EJECTOR FORCE
kN
38
OTHER
MAX.PUMP PRESSURE
MPa
16
PUMP MOTOR POWER
kW
11
HEATING POWER
kW
6.05
MACHINE DIMENSION(L*W*H)
m
4.0*1.1*1.8
OILTANK CUBAGE
L
200
MACHINE WEIGHT
t
3.4Specification:
Feature
1. Clamp unit
??The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
??Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
??End point positioning controlled by high precision transducers.
??Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
??Tie bars with unload slot marches spring nut can be constant of using for long time.
??closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
??five points holding pressure to clamping processes computer-optimized.
2. Injection unit
??n opposed cylinders ensure parallel injection movement.
??ew cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
3. Hydraulic system
??ustable backpressure and zero backpressure may be option.
??egrations valve board is response soon and high precision.
??raulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
4. Electrical control unit
a) There is 3-manners of manual, semi-auto, automatic in the menu.
b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
c) The menu of special computer imported has two color: one is black and write, other color.
SPECIFICATION
A
B
C
D
INJECTION UNIT
SCREW DIAMETER
mm
32
35
38
SCREW L/D RATIO
L/D
24.8
22
20.2
SHOT VOLUME(THEORETICAL)
cm3
112
134
158
INJECTION WEIGHT(PS)
g
102
122
144
INJECTION RATE
g/s
74
89
105
PLASTICIZING CAPACITY
g/s
10.8
11.5
13
INJECTION PRESSURE
MPa
203
170
143
SCREW SPEED
rpm
200
CLAMPING UNIT
CLAMP FORCE
kN
900
OPEN STROKE
mm
350
SPACE BETWEEN TIE BARS(W*H)
mm
360*360
MAX.MOULD HEIGHT
mm
380
MIN.MOULD HEIGHT
mm
150
EJECTOR STROKE
mm
100
EJECTOR FORCE
kN
38
OTHER
MAX.PUMP PRESSURE
MPa
16
PUMP MOTOR POWER
kW
11
HEATING POWER
kW
6.05
MACHINE DIMENSION(L*W*H)
m
4.0*1.1*1.8
OILTANK CUBAGE
L
200
MACHINE WEIGHT
t
3.4Specification:
Feature
1. Clamp unit
??The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
??Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
??End point positioning controlled by high precision transducers.
??Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
??Tie bars with unload slot marches spring nut can be constant of using for long time.
??closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
??five points holding pressure to clamping processes computer-optimized.
2. Injection unit
??n opposed cylinders ensure parallel injection movement.
??ew cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
3. Hydraulic system
??ustable backpressure and zero backpressure may be option.
??egrations valve board is response soon and high precision.
??raulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
4. Electrical control unit
a) There is 3-manners of manual, semi-auto, automatic in the menu.
b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
c) The menu of special computer imported has two color: one is black and write, other color.
SPECIFICATION
A
B
C
D
INJECTION UNIT
SCREW DIAMETER
mm
32
35
38
SCREW L/D RATIO
L/D
24.8
22
20.2
SHOT VOLUME(THEORETICAL)
cm3
112
134
158
INJECTION WEIGHT(PS)
g
102
122
144
INJECTION RATE
g/s
74
89
105
PLASTICIZING CAPACITY
g/s
10.8
11.5
13
INJECTION PRESSURE
MPa
203
170
143
SCREW SPEED
rpm
200
CLAMPING UNIT
CLAMP FORCE
kN
900
OPEN STROKE
mm
350
SPACE BETWEEN TIE BARS(W*H)
mm
360*360
MAX.MOULD HEIGHT
mm
380
MIN.MOULD HEIGHT
mm
150
EJECTOR STROKE
mm
100
EJECTOR FORCE
kN
38
OTHER
MAX.PUMP PRESSURE
MPa
16
PUMP MOTOR POWER
kW
11
HEATING POWER
kW
6.05
MACHINE DIMENSION(L*W*H)
m
4.0*1.1*1.8
OILTANK CUBAGE
L
200
MACHINE WEIGHT
t
3.4Specification:
Feature
1. Clamp unit
??The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
??Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
??End point positioning controlled by high precision transducers.
??Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
??Tie bars with unload slot marches spring nut can be constant of using for long time.
??closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
??five points holding pressure to clamping processes computer-optimized.
2. Injection unit
??n opposed cylinders ensure parallel injection movement.
??ew cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
3. Hydraulic system
??ustable backpressure and zero backpressure may be option.
??egrations valve board is response soon and high precision.
??raulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
4. Electrical control unit
a) There is 3-manners of manual, semi-auto, automatic in the menu.
b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
c) The menu of special computer imported has two color: one is black and write, other color.
SPECIFICATION
A
B
C
D
INJECTION UNIT
SCREW DIAMETER
mm
32
35
38
SCREW L/D RATIO
L/D
24.8
22
20.2
SHOT VOLUME(THEORETICAL)
cm3
112
134
158
INJECTION WEIGHT(PS)
g
102
122
144
INJECTION RATE
g/s
74
89
105
PLASTICIZING CAPACITY
g/s
10.8
11.5
13
INJECTION PRESSURE
MPa
203
170
143
SCREW SPEED
rpm
200
CLAMPING UNIT
CLAMP FORCE
kN
900
OPEN STROKE
mm
350
SPACE BETWEEN TIE BARS(W*H)
mm
360*360
MAX.MOULD HEIGHT
mm
380
MIN.MOULD HEIGHT
mm
150
EJECTOR STROKE
mm
100
EJECTOR FORCE
kN
38
OTHER
MAX.PUMP PRESSURE
MPa
16
PUMP MOTOR POWER
kW
11
HEATING POWER
kW
6.05
MACHINE DIMENSION(L*W*H)
m
4.0*1.1*1.8
OILTANK CUBAGE
L
200
MACHINE WEIGHT
t
3.4 |
|
|
|
|
|
|
|
|
