Specification:
 Feature
  1. Clamp unit
 
 ??The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
  ??Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly

and lightly.
 
 ??End point positioning controlled by high precision transducers.
  ??Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
 
 ??Tie bars with unload slot marches spring nut can be constant of using for long time.
  ??closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
 
 ??five points holding pressure to clamping processes computer-optimized.
  2. Injection unit
 
 ??n opposed cylinders ensure parallel injection movement.
  ??ew cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double

metals.
 
 3. Hydraulic system
  ??ustable backpressure and zero backpressure may be option.
 
 ??egrations valve board is response soon and high precision.
  ??raulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
 
 4. Electrical control unit
  a) There is 3-manners of manual, semi-auto, automatic in the menu.
 
 b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
  c) The menu of special computer imported has two color: one is black and write, other color.
 
 
 
SPECIFICATION  
A B C D
INJECTION UNIT  
SCREW DIAMETER  mm  67 70   75  
SCREW L/D RATIO  L/D  22.5  21.5  20  
SHOT VOLUME(THEORETICAL)  cm3  905  987  1134  
INJECTION WEIGHT(PS)  g  826  900  1032  
INJECTION RATE  g/s  288  315  361  
PLASTICIZING CAPACITY  g/s  38  40  43  
INJECTION PRESSURE  MPa  186  171  148  
SCREW SPEED  rpm  160
CLAMPING UNIT  
CLAMP FORCE  kN  3200
OPEN STROKE  mm  660
SPACE BETWEEN TIE BARS(W*H)  mm  660*660
MAX.MOULD HEIGHT  mm  720
MIN.MOULD HEIGHT  mm  250
EJECTOR STROKE  mm  160
EJECTOR FORCE  kN  70
OTHER  
MAX.PUMP PRESSURE  MPa  16
PUMP MOTOR POWER  kW  37
HEATING POWER kW  17.25
MACHINE DIMENSION(L*W*H)  m  6.30*1.70*2.40
OILTANK CUBAGE L  620
MACHINE WEIGHT  t  12.5